Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

• Plug/Connector Type: NEMA 5-20P
• Receptacles: 4 x NEMA 5-15R
• Receptacles: 4 x NEMA 5-15/20R
• Interfaces/Ports: USB
• Interfaces/Ports: DB-9 RS-232 Serial
• Network Management: SNMP Manageable Included
• Batteries: User Replaceable Hot-swappable
• Backup/Run Time: 0.08 Hour 1.92 kW Full Load
• Backup/Run Time: 0.20 Hour 960 W Half Load
• Battery Recharge Time: <4.50 Hour
• Load Capacity: 2.20 kVA/1.92 kW
• Input Voltage: 110 V AC
• Input Voltage Range: 120 V AC Nominal
• Output Voltage: 120 V AC Nominal
• Height: 3.5"
• Width: 17.5"
• Depth: 19.5"
• Form Factor: 2U Rack-mountable
• Weight (Approximate): 57.60 lb

Product may differ from image shown